A total of four sliders are available in the product configurator.
The first two are for the required performance and capacity.
Those are meant to act as a rough guide value of what you or your customer consider required.
The second pair is limited by the values feasible with our storage systems.
This means you finalize the configuration based on our battery modules and set the final values that will define the system at the end.
Just move the sliders to the left or right to adjust the configuration to your wishes.
If you have any questions or challenges, please contact our colleagues from portal support, who offer support for the product configurator or alternatively by phone +49 3491 8797 100 between 8am and 4pm.